The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications.
Features
- Speaker type: 2-way, Bi-amp powered speaker, Bass-reflex type
- Frequency range: (-10dB) 52Hz 20kHz
- Nominal coverage: H - 90°; V - 60°
- Components: LF Diameter: 12" cone, Voice Coil: 2", Magnet: Ferrite; HF Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite
- Crossover: 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
- Output power: Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
- Maximum output level (1m; on axis): 131dB SPL
- I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
- Heat dissipation: Fan cooling, 4 speeds
- Power requirements: 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
- Power consumption: 74W (1/8 Power Consumption), 18W(Idle)
- Handle: Side x 2
- Flying and mounting hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
- Pole socket: 35mm (Bottom x 1)
- Dimensions: W - 376mm (14.8"); H - 601mm (23.7"); D - 348mm (13.7")
- Series Name: Yamaha DBR Series
- Powered: Yes
- Speaker Size: 12"
- Total Power: 501W to 1000W
- Max Peak SPL: 131dB to 140dB
- Weight: 31 - 40 lbs.
- Height: 12" to 24"
- Width: 19" to 24"
- Depth: 13" to 18"